승진이의 세상 살아가는 이야기  
Front Page
Tag | Location | Media | Guestbook | Admin   
 
'LPIC'에 해당하는 글(8)
2007.11.15   LPIC 102 접수 완료!! (3)
2007.11.14   7장 정리중..
2007.11.11   LPIC 102 Detailed Objectives
2007.11.11   LPIC 102 개요
2007.11.07   LPIC 시험을 접수했습니다. (2)


LPIC 102 접수 완료!!
사용자 삽입 이미지
LPIC 102 접수 완료 
토요일 시간은 변경할 것 !!
자 이번에도 힘내서 합격하자!! 열공!! ^^ 화이팅!!!
신고
Tag : LPIC, 리눅스


7장 정리중..

* Using man
man   주어진 명령이나 자원들의 매뉴얼을 출력한다. more에서와 같이 페이지 넘기기나 탐색 명령을 줄

수 있다.
      man [options] [section] command
  -k  다음에 키워드를 주면 그것이 포함된 명령어를 보여준다. 이것이 apropos명령과 같다.
  -f  다음에 명령어를 적어주면 한 줄짜리 짧은 명령어 설명을 보여준다.
      이것은 whatis 명령과 같다.

section은 다음과 같이 나누어져 있다. 해당 번호를 적으면 된다.
(1) User Commands
(2) System Calls
(3) Subroutines
(4) Devioes
(5) File Formats
(6) Games
(7) Miscellaneous
(8) Sys. Administration

man passwd   (section 1의 커버 형태로 출력) 기본..
man 5 passwd   (section 5의 커버 형태로 출력)
Name , Synopsis(어떻게 명령어사용하나),Description , Options, Files(Man page주제에 관련된 파일들

), See also, Bugs, History, Author

summary 찾기 whatis man
thorough 찾기 apropos

man --path /opt/oddprog/man oddprog
/opt/oddprog/man에 저장된 oddprog 에 관련된 man page를 가져온다.
man /opt/oddprog/man/man1/oddprog.1.gz 로 해서 파일로 불러올 수도 있다.

iptables
기본 : iptables [-t table] -A CHAIN selection-criteria -j TARGET

CHAIN = INPUT, OUTPUT, FORWARD

-p --protocol     ex) -p tcp        
--source-port  --sport        ex) --sport 1024:1028
--destination-port --dport    "
--source   -s         -s 원본 아이피  ex) -s 172.24.1.0/24
--destination    -d    "
--in-interface    -I            ex) -I eth0        eth0에서 들어오는 패킷
--out-interface    -o           ex) -o "

예 >> iptables -A INPUT -p tcp --dport 445 -s 172.24.1.0/24 -j ACCEPT

신고

'승진이 공부중 > LPIC 공부중' 카테고리의 다른 글

리눅스 find 명령어(링크)  (0) 2011.03.14
리눅스 쉘 프로그래밍 (링크)  (0) 2011.03.10
XARGS 사용법(링크)  (0) 2011.03.10
리눅스 명령어 find 결과를 지우기  (0) 2010.04.09
7장 정리중..  (0) 2007.11.14
LPIC 102 Detailed Objectives  (0) 2007.11.11
LPIC 102 개요  (0) 2007.11.11
LPIC 1장 정리중..(ing)  (0) 2007.10.31
공부 계획..!  (0) 2007.10.30
-RedHat전문 교육 기관의 테스트 및 정답, 해설-  (0) 2007.10.26
Tag : LPIC, 리눅스


LPIC 102 Detailed Objectives

Exam 102: Detailed Objectives

This is a required exam for LPI certification Level 1. It covers basic skills for the Linux Professional that are common across all distributions of Linux.

IMPORTANT INFORMATION: These are the current 102 objectives, which are valid effective 2006-01-01. The 102 exams which are delivered through test centers all over the world, will reflect these updated objectives for English in early 2006 and all other languages by late 2006/early 2007. Candidates should be prepared to take exams based upon these objectives after 1Q2006.

Each objective is assigned a weighting value. The weights range roughly from 1 to 10 and indicate the relative importance of each objective. Objectives with higher weights will be covered in the exam with more questions.

Maintainer: Dimitrios "Taki" Bogiatzoules, Product Developer
Last modification: 2005-12-31

Topic 105: Kernel

1.105.1 Manage/Query kernel and kernel modules at runtime
Comment this objective!
Weight: 4

Description: Candidates should be able to manage and/or query a kernel and kernel loadable modules.

Key knowledge area(s):
Use command-line utilities to get information about the currently running kernel and kernel modules.
Manually load and unload kernel modules.
Determine when modules can be unloaded.
Determine what parameters a module accepts.
Configure the system to load modules by names other than their file name.

The following is a partial list of the used files, terms and utilities:
/lib/modules/kernel-version/modules.dep
/etc/modules.conf
/etc/modprobe.conf
depmod
insmod
lsmod
rmmod
modinfo
modprobe
uname

1.105.2 Reconfigure, build and install a custom kernel and kernel modules
Comment this objective!
Weight: 3

Description: Candidates should be able to customize, build and install a kernel and kernel loadable modules from source.

Key knowledge area(s):
Customize the current kernel configuration.
Build a new kernel and appropriate kernel modules.
Install a new kernel and any modules.
Ensure that the boot manager can locate the new kernel and associated files.

The following is a partial list of the used files, terms and utilities:
/usr/src/linux/*
/usr/src/linux/.config
/lib/modules/kernel-version/*
/boot/*
make
make targets: all, config, menuconfig, xconfig, gconfig oldconfig, modules, install, modules_install, depmod, rpm-pkg, binrpm-pkg, deb-pkg

Topic 106: Boot, Initialization, Shutdown and Runlevels

1.106.1 Boot the system
Comment this objective!
Weight: 3

Description: Candidates should be able to guide the system through the booting process.

Key knowledge area(s):
Give commands to the boot loader and options to the kernel at boot time.
Check boot events in the log files.

The following is a partial list of the used files, terms and utilities:
/var/log/messages
/etc/modules.conf
/etc/modprobe.conf
dmesg
LILO
GRUB

1.106.2 Change runlevels and shutdown or reboot system
Comment this objective!
Weight: 3

Description: Candidates should be able to manage the runlevel of the system. This objective includes changing to single user mode, shutdown or rebooting the system. Candidates should be able to alert users before switching runlevel and properly terminate processes. This objective also includes setting the default runlevel.

Key knowledge area(s):
Set the default runlevel.
Change between run levels including single user mode.
Shutdown and reboot from the command line.
Alert users before switching runlevels or other major system event.
Properly terminate processes.

The following is a partial list of the used files, terms and utilities:
/etc/inittab
shutdown
init

Topic 107: Printing

1.107.2 Manage printers and print queues
Comment this objective!
Weight: 1

Description: Candidates should be able to manage print queues and user print jobs.

Key knowledge area(s):
Configure and monitor a print server.
Manage user print queues.
Troubleshoot general printing problems.

The following is a partial list of the used files, terms and utilities:
CUPS configuration files, tools and utilities
/etc/printcap
lpc
lpq
lprm
lp

1.107.3 Print files
Comment this objective!
Weight: 1

Description: Candidates should be able to manage print queues and manipulate print jobs.

Key knowledge area(s):
Add and remove jobs from configured printer queues.
Convert text files to postscript for printing.

The following is a partial list of the used files, terms and utilities:
CUPS configuration files, tools and utilities
a2ps
lpr
lpq

1.107.4 Install and configure local and remote printers
Comment this objective!
Weight: 1

Description: Candidates should be able to install and configure local and remote printers.

Key knowledge area(s):
Install a printer daemon.
Install and configure a print filter.
Make local and remote printers accessible for a Linux system, including postscript, non-postscript and Samba printers.

The following is a partial list of the used files, terms and utilities:
CUPS configuration files, tools and utilities
/etc/printcap
/var/spool/cups/
/var/spool/lpd/*/
lpd

Topic 108: Documentation

1.108.1 Use and manage local system documentation
Comment this objective!
Weight: 4

Description: Candidates should be able to use and administer the man facility and the material in /usr/share/doc/.

Key knowledge area(s):
Find relevant man pages.
Search man page sections.
Find commands and man pages related to them.
Configure access to man sources and the man system.
Prepare man pages for printouts.
Use the system documentation stored in /usr/share/doc/ and determine what documentation to keep in /usr/share/doc/.

The following is a partial list of the used files, terms and utilities:
MANPATH man
apropos
whatis

1.108.2 Find Linux documentation on the Internet
Comment this objective!
Weight: 3

Description: Candidates should be able to find and use Linux documentation on the internet.

Key knowledge area(s):
This objective includes using Linux documentation at sources such as the Linux Documentation Project (LDP), vendor and third-party websites, newsgroups, newsgroup archives and mailing lists.

The following is a partial list of the used files, terms and utilities:
Not applicable

1.108.5 Notify users on system-related issues
Comment this objective!
Weight: 1

Description: Candidates should be able to notify the users about current issues related to the system.

Key knowledge area(s):
Automate communication with users through logon messages.

The following is a partial list of the used files, terms and utilities:
/etc/issue
/etc/issue.net
/etc/motd

Topic 109: Shells, Scripting, Programming and Compiling

1.109.1 Customize and use the shell environment
Comment this objective!
Weight: 5

Description: Candidates should be able to customize shell environments to meet users' needs.

Key knowledge area(s):
Set environment variables (e.g. PATH) at login or when spawning a new shell.
Write BASH functions for frequently used sequences of commands.

The following is a partial list of the used files, terms and utilities:
Internal BASH functions and commands
~/.bash_profile
~/.bash_login
~/.profile
~/.bashrc
~/.bash_logout
~/.inputrc
function
export
env
set
lists
seq
unset

1.109.2 Customize or write simple scripts
Comment this objective!
Weight: 3

Description: Candidates should be able to customize existing scripts, or write simple new BASH scripts.

Key knowledge area(s):
Use standard sh syntax (loops, tests).
Use command substitution.
Test return values for success or failure or other information provided by a command.
Perform conditional mailing to the superuser.
Correctly select the script interpreter through the shebang (#!) line.
Manage the location, ownership, execution and suid-rights of scripts.

The following is a partial list of the used files, terms and utilities:
for
while
test
chmod

Topic 111: Administrative Tasks

1.111.1 Manage users and group accounts and related system files
Comment this objective!
Weight: 4

Description: Candidates should be able to add, remove, suspend and change user accounts.

Key knowledge area(s):
Add, modify and remove users and groups.
Manage user/group info in password/group databases.
Correctly manage shadow password/group databases using the appropriate tools.
Create and manage special purpose and limited accounts.

The following is a partial list of the used files, terms and utilities:
/etc/passwd
/etc/shadow
/etc/group
/etc/gshadow
chage
gpasswd
groupadd
groupdel
groupmod
passwd
useradd
userdel
usermod

1.111.2 Tune the user environment and system environment variables
Comment this objective!
Weight: 3

Description: Candidates should be able to modify global and user profiles.

Key knowledge area(s):
Set environment variables.
Maintain skeleton directories for new user accounts.
Set command search path with the proper directory.

The following is a partial list of the used files, terms and utilities:
/etc/profile
/etc/skel
env
export
set
unset

1.111.3 Configure and use system log files to meet administrative and security needs
Comment this objective!
Weight: 3

Description: Candidates should be able to configure and manage system logs.

Key knowledge area(s):
Manage the type and level of information logged.
Manually scan log files for notable activity.
Monitor log files.
Automatically rotate and archive log files.
Track down problems noted in log files.

The following is a partial list of the used files, terms and utilities:
/etc/syslog.conf
/var/log/*
logrotate
tail -f

1.111.4 Automate system administration tasks by scheduling jobs to run in the future
Comment this objective!
Weight: 4

Description: Candidates should be able to use cron or anacron to run jobs at regular intervals and to use at to run jobs at a specific time.

Key knowledge area(s):
Manage cron and at jobs.
Configure user access to cron and at services.

The following is a partial list of the used files, terms and utilities:
/etc/anacrontab
/etc/at.deny
/etc/at.allow
/etc/crontab
/etc/cron.allow
/etc/cron.deny
/var/spool/cron/*
at
atq
atrm
crontab

1.111.5 Maintain an effective data backup strategy
Comment this objective!
Weight: 3

Description: Candidates should be able to plan a backup strategy and backup filesystems automatically to various media.

Key knowledge area(s):
Dump a raw device to a file or vice versa.
Perform partial and manual backups.
Verify the integrity of backup files.
Partially or fully restore backups.

The following is a partial list of the used files, terms and utilities:
cpio
dd
dump
restore
tar

1.111.6 Maintain system time
Comment this objective!
Weight: 4

Description: Candidates should be able to properly maintain the system time and synchronize the clock via NTP.

Key knowledge area(s):
Set the system date and time.
Set the BIOS clock to the correct time in UTC.
Configure the correct timezone.
Configure NTP including correcting for clock drift.

The following is a partial list of the used files, terms and utilities:
/usr/share/zoneinfo
/etc/timezone
/etc/localtime
/etc/ntp.conf
/etc/ntp.drift
date
hwclock
ntpd
ntpdate

Topic 112: Networking Fundamentals

1.112.1 Fundamentals of TCP/IP
Comment this objective!
Weight: 4

Description: Candidates should demonstrate a proper understanding of network fundamentals.

Key knowledge area(s):
Demonstrate an understanding of IP-addresses including but not limited to:
Network masks, for example: determine the network part and the broadcast address for a host based on its address and subnet mask in "dotted quad" or abbreviated notation or determine the network address, broadcast address and netmask when given an IP-address and number of bits in the address that are used to identify the host.
Demonstrate an understanding of the network classes and classless subnets (CIDR) and the reserved addresses for private network use.
Understand the function and application of a default route.
Understand basic internet protocols (IP, ICMP, TCP, UDP) and the more common TCP and UDP ports (20, 21, 23, 25, 53, 80, 110, 119, 139, 143, 161).
Basic knwoledge about the differences between IPV4 and IPV6.

The following is a partial list of the used files, terms and utilities:
/etc/services
ftp
telnet
host
ping
dig
traceroute
whois

1.112.3 TCP/IP configuration and troubleshooting
Comment this objective!
Weight: 7

Description: Candidates should be able to view, change and verify configuration settings and operational status for various network interfaces.

Key knowledge area(s):
Manually and automatically configure network interfaces and routing tables to include adding, starting, stopping, restarting, deleting or reconfiguring network interfaces.
Change, view, or configure the routing table and correct an improperly set default route manually.
Configure a DHCP client.
Basic TCP/IP host configuration.
Debug problems associated with the network configuration.

The following is a partial list of the used files, terms and utilities:
/etc/HOSTNAME or /etc/hostname
/etc/hosts
/etc/networks
/etc/host.conf
/etc/resolv.conf
/etc/nsswitch.conf
ifconfig
ifup & ifdown
route
dhcpcd
dhclient
pump
host
hostname
domainname
dnsdomainname
netstat
ping
traceroute
tcpdump
Network scripts run during system initialization.

1.112.4 Configure Linux as a PPP client
Comment this objective!
Weight: 3

Description: Candidates should understand the basics of the PPP protocol and be able to configure and use PPP for outbound connections.

Key knowledge area(s):
Define the chat sequence to connect (given a login example) and the setup commands to be run automatically when a PPP connection is made.
Initialize and terminate a PPP connection, with a modem, ISDN or ADSL with the appropriate scripts.
Set PPP to automatically reconnect if disconnected.

The following is a partial list of the used files, terms and utilities:
/etc/ppp/options.*
/etc/ppp/peers/*
/etc/wvdial.conf
/etc/ppp/ip-up
/etc/ppp/ip-down
wvdial
ppp

Topic 113: Networking Services

1.113.1 Configure and manage xinetd, inetd and related services
Comment this objective!
Weight: 4

Description: Configure and manage xinetd, inetd and related services.

Key knowledge area(s):
Configure which services are available through (x)inetd.
Manually start, stop and restart internet services.
Configure basic network services including ssh and ftp.
Set a service to run as another user instead of the default in (x)inetd configuration.
Basic knowledge of tcpwrappers to allow or deny services on a host-by-host basis.

The following is a partial list of the used files, terms and utilities:
/etc/hosts.allow
/etc/hosts.deny
/etc/services
/etc/xinetd.conf
/etc/xinetd.d/
/etc/inetd.conf
/var/log/xinetd.log

1.113.2 Operate and perform basic configuration of Mail Tranfer Agent (MTA)
Comment this objective!
Weight: 4

Description: Candidates should be able to operate and perform basic configuration of MTA. Advanced custom configurations not included.

Key knowledge area(s):
Modify simple parameters in MTA configuration files.
Create e-mail aliases.
Manage the e-mail queue.
Start and stop MTA.
Configure e-mail forwarding.
Check for and close an open relay on the mailserver.
Perform basic troubleshooting of MTA.

The following is a partial list of the used files, terms and utilities:
Configuration files, documentation and commands for: postfix, qmail, exim and sendmail
/etc/mail/*
~/.forward
sendmail emulation layer commands
newaliases

1.113.3 Operate and perform basic configuration of Apache
Comment this objective!
Weight: 4

Description: Candidates should be able to operate and perform basic configuration of Apache. Advanced custom configurations not included.

Key knowledge area(s):
Modify simple parameters in Apache configuration files.
Start and stop httpd and restart after modification to configuration.
Arrange for automatic starting of httpd upon boot.

The following is a partial list of the used files, terms and utilities:
/etc/apache2/
httpd.conf
apache2ctl
apachectl
httpd

1.113.4 Properly manage the NFS and SAMBA daemons
Comment this objective!
Weight: 4

Description: Candidates should know how to manage the NFS, smb and nmb daemons.

Key knowledge area(s):
Mount remote filesystems using NFS.
Configure NFS for exporting local filesystems.
Start, stop and restart the NFS server.
Install and configure Samba using the included GUI tools (swat) or direct edit of the /etc/smb.conf file (Note: this deliberately excludes advanced NT domain issues but includes simple sharing of home directories and printers, as well as correctly setting the nmbd as a WINS client).

The following is a partial list of the used files, terms and utilities:
/etc/exports
/etc/fstab
/etc/smb.conf
mount
umount

1.113.5 Setup and configure basic DNS services
Comment this objective!
Weight: 4

Description: Candidates should be able to configure basic DNS services.

Key knowledge area(s):
Configure hostname lookups and troubleshoot problems with local caching-only name server.
Demonstrate an understanding of the domain registration and DNS translation process.
Understanding configuration files for BIND8 and BIND9.

The following is a partial list of the used files, terms and utilities:
/etc/hosts
/etc/resolv.conf
/etc/nsswitch.conf
/etc/named.conf
named

1.113.7 Set up secure shell (OpenSSH)
Comment this objective!
Weight: 4

Description: The candidate should be able to obtain and configure OpenSSH.

Key knowledge area(s):
Perform basic OpenSSH installation and troubleshooting.
Configure sshd to start at system boot.

The following is a partial list of the used files, terms and utilities:
/etc/hosts.allow
/etc/hosts.deny
/etc/nologin
/etc/ssh/sshd_config
/etc/ssh_known_hosts
/etc/sshrc
sshd
ssh-keygen

Topic 114: Security

1.114.1 Perform security administration tasks
Comment this objective!
Weight: 4

Description: Candidates should know how to review system configuration to ensure host security in accordance with local security policies.

Key knowledge area(s):
Configure tcpwrappers.
Audit a system to find files with the suid/sgid bit set.
Verify packages.
Set or change user passwords and password aging information.
Update binaries as recommended by CERT, BUGTRAQ and/or distribution's security alerts.
Demonstrate basic knowledge of iptables.
Being able to use nmap and netstat to discover open ports on a system.

The following is a partial list of the used files, terms and utilities:
/proc/sys/net/ipv4/ip_*
find
iptables
passwd
socket
nmap
netstat

1.114.2 Setup host security
Comment this objective!
Weight: 3

Description: Candidates should know how to set up a basic level of host security.

Key knowledge area(s):
Configure syslog with an eye to security.
Set up and manage shadow passwords.
Set up a e-mail alias for root's e-mail.
Turn off network services not in use.

The following is a partial list of the used files, terms and utilities:
/etc/xinetd.d/*
/etc/xinetd.conf
/etc/inet.d/*
/etc/inetd.conf
/etc/nologin
/etc/passwd
/etc/shadow
/etc/syslog.conf

1.114.3 Setup user level security
Comment this objective!
Weight: 1

Description: Candidates should be able to configure user level security. Tasks include limits on user logins, processes and memory usage.

Key knowledge area(s):
Set up limits on user logins, processes and memory usage.

The following is a partial list of the used files, terms and utilities:
quota
usermod
ulimit

신고

'승진이 공부중 > LPIC 공부중' 카테고리의 다른 글

리눅스 find 명령어(링크)  (0) 2011.03.14
리눅스 쉘 프로그래밍 (링크)  (0) 2011.03.10
XARGS 사용법(링크)  (0) 2011.03.10
리눅스 명령어 find 결과를 지우기  (0) 2010.04.09
7장 정리중..  (0) 2007.11.14
LPIC 102 Detailed Objectives  (0) 2007.11.11
LPIC 102 개요  (0) 2007.11.11
LPIC 1장 정리중..(ing)  (0) 2007.10.31
공부 계획..!  (0) 2007.10.30
-RedHat전문 교육 기관의 테스트 및 정답, 해설-  (0) 2007.10.26
Tag : LPIC, 리눅스, 상세한 시험 경향


LPIC 102 개요

Exam 102: Tasks and Sample Questions

LPI Level 1 exam 102 tests basic capabilities in these areas:

  • Kernel

  • Boot, Initialization, Shutdown and Runlevels

  • Printing

  • Documentation

  • Shells, Scripting, Programming, and Compiling

  • Administrative Tasks

  • Networking Fundamentals

  • Networking Services

  • Security

Sample Questions

The following are sample questions relating to LPI Exam 102. None of these items actually appear on the real exam, but they were actual submissions and are representative of the types of questions and the content covered by the exam. Please note however that the items below are flawed in some way and have been rejected; they are presented only as an illustration.

OBJECTIVE: 1.1.1 TYPE: mc

Which command is used to change settings on IDE hard disk drives?

   1. hdparm
   2. hddparm
   3. diskparm
   4. hdparam
   5. ideconfig

OBJECTIVE: 1.12.1 TYPE: mc

Your logfile shows repeated connections to TCP port 143. Which named service is being accessed?

   1. imap
   2. smbd
   3. nmbd
   4. pop2
   5. smtp

OBJECTIVE: 1.12.1 TYPE: fitb

What type of packet does an IP ping use (provide acronym)?

   1. ICMP

OBJECTIVE: 1.12.2 TYPE: mc

To learn more about the management of an Internet site, the best utility to use would be:

   1. whois
   2. traceroute
   3. ping
   4. telnet
   5. rpcdump

OBJECTIVE: 1.12.3 TYPE: mc

If you had a Linux system routing 3 different Networks through 3 NICs and you were having trouble with your IP-Forwarding. Where would you look to ensure that IP-Forwarding is actually enabled?

   1. cat /proc/sys/net/ipv4/ip_forward
   2. netstat
   3. cat /proc/net/tcp
   4. iptraf -d eth0
   5. tail -f /var/log/messages

OBJECTIVE: 1.13.1 TYPE: mc

What file is used for associating port numbers to port names?

   1. /etc/services
   2. /etc/hosts
   3. /etc/inetd.conf
   4. /etc/securetty
   5. /etc/ports

OBJECTIVE: 1.13.4 TYPE: mc

You want to make the directory /local available via NFS. All users on your local network should be allowed to read and write files. Which of the following is correct, assuming that your local network is 192.168.1.0, and your machine is part of the DNS domain foobar.com?

   1. /local 192.168.1.0/255.255.255.0(rw)
   2. /local *.com(rw)
   3. 192.168.1.0 /local
   4. /local 192.168.1.0(rw)

Top OBJECTIVE: 1.14.1 TYPE: fitb

Which file can you create to prevent non-root users from logging into the system? (specify path and filename)

   1. /etc/nologin

OBJECTIVE: 1.14.2 TYPE: fitb

What command can be used to display a formatted output of the wtmp file? (no arguments)

   1. last

OBJECTIVE: 1.14.3 TYPE: fitb

Which command can be executed by a user who is already logged into the system, in order to change to the root user? (type the command without any parameters)

   1. su

OBJECTIVE: 1.7.2 TYPE: mc

To cause a particular print job to be printed next, regardless of its current position in the queue, what command would be used?

   1. lpc topq
   2. lpc -t
   3. lpq -t
   4. lpq --next
   5. lpc move

OBJECTIVE: 1.7.2 TYPE: mc

Which statement describes the LPD daemon?

   1. Manages the printing subsystem
   2. Manages all incoming connections and spawns off child processes
   3. Is responsible for file sharing across a network
   4. Manages scheduling of routine system tasks
   5. Keeps track of system messages and errors

OBJECTIVE: 2.10.4 TYPE: mc

When configuring a terminal for X what does the -fn switch do?

   1. It sets the font size and or type for the terminal.
   2. It sets the terminal's default function.
   3. It places the terminal in the foreground on your screen.
   4. It sets the terminal's initial value to false.
   5. It sets the terminal's initial display to reverse video.

OBJECTIVE: 2.2.1 TYPE: mc

What command(s) do you use to create swap space?

   1. mkswap
   2. activeswap
   3. swapon
   4. initswap
   5. mkfs -t swap

OBJECTIVE: 2.2.3 TYPE: fitb

Type the full command you could use to decompress the file "foo.gz"

   1. gzip -d foo.gz
   2. gunzip -d foo.gz
   3. gunzip foo.gz
   4. unzip foo.gz
   5. decompress foo.gz

OBJECTIVE: 2.2.5 TYPE: mc

How can you add package information from a file Packages to the database of available Debian packages?

   1. dpkg --merge-avail Packages
   2. dpkg --update-avail Packages
   3. dpkg --record-avail Packages
   4. dpkg -U Packages

OBJECTIVE: 2.2.6 TYPE: mc

You need to find out which package owns a file called /etc/paper.config. Which command will answer this question?

   1. rpm -qf /etc/paper.config
   2. rpm -qa|grep /etc/paper.config
   3. rpm -Fq /etc/paper.config
   4. rpm -q /etc/paper.config
   5. rpm --requires /etc/paper.config

신고

'승진이 공부중 > LPIC 공부중' 카테고리의 다른 글

리눅스 find 명령어(링크)  (0) 2011.03.14
리눅스 쉘 프로그래밍 (링크)  (0) 2011.03.10
XARGS 사용법(링크)  (0) 2011.03.10
리눅스 명령어 find 결과를 지우기  (0) 2010.04.09
7장 정리중..  (0) 2007.11.14
LPIC 102 Detailed Objectives  (0) 2007.11.11
LPIC 102 개요  (0) 2007.11.11
LPIC 1장 정리중..(ing)  (0) 2007.10.31
공부 계획..!  (0) 2007.10.30
-RedHat전문 교육 기관의 테스트 및 정답, 해설-  (0) 2007.10.26
Tag : 102 개요, LPIC, 리눅스


LPIC 시험을 접수했습니다.
사용자 삽입 이미지

단 몇일만에 공부를 하고 시험을 볼 생각을 하고 있어요..
참.. 위험한 생각이지요..^^;
그래도 열심히 하면 딸 수 있을거라고 생각하기에 시험 접수를 했습니다.
그리고 프로젝트도 이번주에는 바쁠 일이 없을것이기에 접수를 했지요.
회사에서도 몰래? 프로젝트 진행하면서 틈틈히 공부하고!
집에서고 공부하고 하면.. 충분히 딸 수 있을거라 생각됩니다.
이제부터 국제 자격증을 따려고 생각하거든요..
덤프를 사서 보지 않고요.. 그냥 예전에 사놓은 LPIC관련 서적이 있습니다.
레벨1 서적으로 영어원서이지요 .
이 책으로 열심히 공부해서 시험볼 생각입니다. !

참 그리고 prometrics ID - sjgleam@naver.com
LPI.org ID - sjgleam
LPI ID - LPI000145477

ID를 적어놓을 곳이 마땅히 생각이 안나서 여기에..^^;

그럼 힘내서 시험 합격합시다!! 아자!!!
신고
Tag : LPIC, 리눅스, 시험, 자격증


BLOG main image
항상 0에서 시작한다는 자세를 갖고 앞으로 나에게 가장 유리한 것이 무엇인지를 찾아라.
 Notice
 Category
분류 전체보기 (228)
승진이 이야기 (29)
승진이 공부중 (16)
승진이 자료실 (1)
승진이와 Android (1)
승진이와 Java (49)
승진이와 DB (10)
승진이와 영어 (3)
승진이와 책 (8)
승진이와 C (6)
승진이와 Web (15)
승진이와 정보 (68)
승진이와 XML (3)
승진이와 Q&A (2)
승진이의 Logs (0)
승진이와 사진 (1)
승진이와 Android (0)
승진이와 자동차 (4)
승진이와 이클립스 RCP (6)
승진이와 프로젝트들 (0)
승진이와 JavaScript (2)
승진이와 쉘프로그래밍 (0)
Flex (0)
 TAGS
자격증 디렉토리 변경 쉘스크립트 넷빈즈 오라클 리눅스 팁 pk fk 조회 리눅스 특수 문자 펀드 쓰레드 IzPack LPIC 디렉토리명 c Android C언어 검색 객체 참조 문자열 검색 얼린 문 열기 에러 문자열 SDK Setup.exe 신협중앙회 java.lang.NoClassDefFoundError java install.xml 수식 엑셀 스윙 자바 뒤로가기 버튼 surge informix 새창으로 열기 크로스 브라우저 FTP업로드 Preference
 Calendar
«   2017/07   »
            1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 31          
 Recent Entries
ORA-32039: 순환 WITH 절에는 열 별칭 목록..
rexpert 오라클 접속 설정 방법
간단한 코드 테이블 설계
String padding 자바스크립트
jquery selector 셀렉터 표현식으로 찾기
이광영 부장판사 솜방망이 처벌 관련 링크들
sql 디벨로퍼 각주 제거 생성 단축키
jquery 이용하여 프린트 1
테이블 자동 줄바꿈 처리 방법
문자 찍는 함수 CHR() 함수와 ASCII()함수
 Recent Comments
5년이란 시간동안 my..
은성훈 - 2014
한국새끼들이 이래서..
qweqwe - 2014
mysql도 rollup기능..
ㄴㄴㄴ - 2014
감사합니다
고마워요 - 2012
헐.. 정말인가요? 사..
BreathAir - 2011
저는 이제서야 관련..
originkim - 2011
아주 막장 그자체라..
기술자 - 2010
request의 parameter..
님 짱!! - 2010
제가 목격한 건데요...
^^ - 2010
네 도대체 왜 그렇게..
BreathAir - 2010
 Recent Trackbacks
スタッドレスタイヤ..
スタッドレスタイヤ..
野球ス ミズノ
野球ス ミズノ
ve may bay
ve may bay
visit this web page..
visit this web page..
timeshare vacation..
timeshare vacation..
joogle.in
joogle.in
arassegaf.com
arassegaf.com
new Software techno..
new Software techno..
www.douloschurch.com
www.douloschurch.com
fix DBF file
fix DBF file
 Archive
2013/12
2013/11
2013/04
2013/03
2012/09
 Link Site
내 마음속 폭풍은 아직 아..
괴짜 프로그래머의 일상사~..
Joel on Software
Android 개발자 커뮤니티 ,..
developer.com
Jace\'s Blog
오라클 10g Documentation
Programing Note (승만이)
실용주의를 꿈꾸며(이클립..
http://pragmatic.kr
자바 누리 기술 문서 / 매..
Reflect
Java API 6.0 한글번역
eclipse resources 문서 링..
자바 관련 소스 많은 곳
미디어 파일 (무제한 웹하드)
http://younghoe.info/
Open Knowledge Share Drea..
키스포토 (사진강좌와 사진..
외국 드라마 TV show 자막..
무료 ebooks
지금샵
 Visitor Statistics
Total : 226,350
Today : 26
Yesterday : 41
rss
 

티스토리 툴바